Selection of our Products

Mex Cassina

Mex Cassina Mex Cassina Mex Cassina Mex Cassina Mex Cassina Mex Cassina
Small low tables in tempered glass, bases painted white or black.
Tops and shoulders in transparent extra-clear tempered glass.
Three sizes:
- square 72 X 72
- rectangular 108,5x36,5 or 72x36,5
Height 24 cm.
The tables can be grouped to form a 108,5 cm. Square.
The white or black bases may be grouped at will.
Also available with round diameter cm. 106 cm, also based in clear tempered glass.

Saarinen Knoll

Eero Saarinen's pedestal table collection includes coffee, side and dining tables. The Knoll logo is located on the uderside of the base. A nameplate with the KnollStudio logo and the signature of Eero Saarinen is also located on the underside of the top or on the top support plate. Tables are available in white laminate, coated marble in a wide range of colours and in the veneer above stated. Base finish is available in black, white and platinum.

Jiff Flexform

A forcefully mono-material collection of dining tables, small tables and consoles. Only solid wood, Canaletto walnut or ash, for the structure and the top. The wood comes in a range of finishes, from natural to coffee, cherry to mocha. The particular design of the four legs of the dining tables unites them at the base in a single longitudinal element, parallel to the top. Three legs are joined at the base in the trio of JIFF tables, which look great beside a sofa. Also rigorously in natural or stained solid wood.

Neutra Fiam Italia

Neutra Fiam Italia Neutra Fiam Italia Neutra Fiam Italia
Monolithic coffee table in 12 mm-thick curved glass. Also available in extralight glass. The two square versions are also available in extralight white back-stained glass and in black back-stained glass.

106 x 106 x 27 cm / 41 3/4” x 41 3/4” x 10 5/8”
126 x 126 x 30 cm / 49 5/8” x 49 5/8” x 11 3/4”
146 x 66 x 28 cm / 51 3/16” x 26” x 11”

Lithos Maxalto

Square, rectangular or circular, to set in the centre of a room or next to the sofa, the new Lithos small tables have travertine marble tops, with its typical light colour, and black Portoro marble with frames in bronzed nickel painted steel. There is also a wood version, available with double slatted tops, with the metal frame finished in warm shades of bronze.

Coffee table Isamu Noguchi Vitra

Coffee table Isamu Noguchi Vitra Coffee table Isamu Noguchi Vitra Coffee table Isamu Noguchi Vitra Coffee table Isamu Noguchi Vitra Coffee table Isamu Noguchi Vitra Coffee table Isamu Noguchi Vitra
Isamu Noguchi's Coffee Table is possibly one of the most copied pieces of modern furniture design in the world, however its deceptively simple form masks an ingenuity that is hard to imitate, and most reproductions disappoint. Vitra produces the Noguchi Coffee Table in co-operation with the Noguchi Foundation, New York.

Hardy Meridiani

Hardy Meridiani Hardy Meridiani Hardy Meridiani Hardy Meridiani Hardy Meridiani
Frame in metal with transparent varnishing or metal with glossy black nickel finish. Finishes for tops: moka-grey-light stained oak veneer, white-greige-brown-chalk-slatepetrol with glossy finish, ebony veneer, black glass, marquinia black - calacatta gold Marbles.

Little Friend Fritz Hansen

Little Friend Fritz Hansen Little Friend Fritz Hansen Little Friend Fritz Hansen Little Friend Fritz Hansen Little Friend Fritz Hansen Little Friend Fritz Hansen
Little Friend is a multifunction table, thanks to the height adjustment is extremely versatile, it can 'be used in different ways, beside the sofa, a chair, but also in the bathroom or bedroom. The floor is made of compact laminate available in different colors. The structure is in chromed steel or painted to match.

White Shell Zanotta

White Shell Zanotta White Shell Zanotta White Shell Zanotta White Shell Zanotta
The young designer describes it as "a complementary piece of furniture that combines the functions of a supporting top and an informal container. It is a tiny niche that can adapt to the most diverse interpretations: beside a fireplace it may hold wood, next to a sofa it can work as a magazine holder, on a terrace it may become a vase or, if accompanied by a comfortable pillow, a house for the cat. The originality of White Shell certainly lies in its flexuous and continuous shape and most of all in the customizations that can be made of it, given the fact that it is easy to use and move, as well as its many functions." Frame in Cristalplant®, composite material based on resins in the shade of matt white.

Tavolo con ruote Fontana Arte

Tavolo con ruote Fontana Arte Tavolo con ruote Fontana Arte
Designer; Gae Aulenti. Low table. Float ground-glass top, 15 mm thick. Industrial casters with black-painted metal brackets.

Groundpiece Flexform

Groundpiece Flexform Groundpiece Flexform Groundpiece Flexform
Coffee table with square container bookcase function. Metal structure covered in leather in different colors. Dimensions: cm. 97 x 97 cm in 2 different heights : 35 or 57 cm.

LC10-P Le Corbusier Cassina

LC10-P Le Corbusier Cassina LC10-P Le Corbusier Cassina LC10-P Le Corbusier Cassina LC10-P Le Corbusier Cassina LC10-P Le Corbusier Cassina LC10-P Le Corbusier Cassina LC10-P Le Corbusier Cassina LC10-P Le Corbusier Cassina
Tables and low tables, square and rectangular in shape, with polished chrome steel legs and steel frame enamelled in glossy basalt, grey, light blue, green, bordeaux and ochre or mat black. Clear or textured glass top, thickness 15 mm (0.6”).
An outdoor version is also available for this model.

120 x 80 x H 70 cm
140 x 140 x H 70 cm
70 x 70 x H 33 cm
120 x 80 x H 33 cm
140 x 140 x H 33 cm.

Elliptical Table ETR Vitra

Elliptical Table ETR Vitra Elliptical Table ETR Vitra Elliptical Table ETR Vitra
This low coffee table with its elegant elliptical shape ressembles a surfboard and was quickly given the nickname "surfboard table". With its double chromed base, the table formally references a theme repeatedly varied on by the Eames, namely that of shaped steel rods welded together to make a fixed, static structure. 

Materials: Laminate tabletop, chromed round steel base 

ETR = Elliptical Table Rod Base 
255 x 2267 x 746 mm.

Balancing Boxes Porro

Balancing Boxes Porro Balancing Boxes Porro Balancing Boxes Porro
Balancing Boxes is a small table consisting of a series of irregularly overlapping white or black painted metal or in wood (eucalyptus, santos rosewood, lauro preto, red gum and tineo finishings) boxes, as though balancing in space. Inclinations, interconnections and a multifaceted image, giving different sensations as we look at it from different angles.

Torei Cassina

Torei Cassina Torei Cassina Torei Cassina Torei Cassina
The series of low tables, already existing in the collection, is enriched with different shapes, dimensions and finishes: new low tables in square, triangular and round shape, in various sizes, in natural and stained black ashwood; rectangular low tables and one round low table in ashwood stained red and square low tables in white Carrara marble. Matte black metal base.

Rialto & Rialto Piano Fiam Italia

Rialto & Rialto Piano Fiam Italia Rialto & Rialto Piano Fiam Italia
RIALTO: Coffee table in 10* or 12 mm-thick curved glass. Also available in extralight glass. 

RIALTO PIANO: Coffee table in 10* or 12 mm-thick curved glass with 10* or 12 mm-thick glass shelf. Also available in extralight glass.

Fly Flexform

Fly Flexform Fly Flexform Fly Flexform Fly Flexform Fly Flexform Fly Flexform Fly Flexform Fly Flexform Fly Flexform
FLY is a family of dining tables, end tables and cabinets. Light in its image, solid and architectural in its form, the dining table has a metal base with two legs to support tops in wood – also extendable – or marble. The collection of tables features the same single leg that splits into three feet at the base. The rectangular tables can have a base placed off center with respect to the top. The end tables are idea for use with the many sofas in the collection. FLY also includes a set of low TV cabinets, accessorized with cowhide baskets and enhanced by tops in marble or wood.
Low tables: Ø40 H46 / Ø60 H53 / Ø120 H35 
Tables: 130x80 / 170x100 
Console: 180x45 

Frame: 
In metal. 

Top: 
In wood with veneers.

Traccia Simon Cassina

Traccia Simon Cassina Traccia Simon Cassina
Table with polished cast bronze bird’s legs with finish on upper side of plywood table top in 24 carat gold leaf. Serial production of the original 1939 Surrealist model.

Cicognino Cassina

Cicognino Cassina Cicognino Cassina Cicognino Cassina Cicognino Cassina Cicognino Cassina
Small table with frame and top in American walnut or natural ashwood or ashwood stained black. This pet-like side table has an extra leg stretching upwards to form its neck and beak shaped handle. The tray border of its table top makes this a light, playful design.

Double Flexform

Double Flexform Double Flexform Double Flexform Double Flexform
DOUBLE is a family of tables with a steel structure, featuring a double top – hence the name. The use of different materials for the two surfaces gives rise to a wide range of configurations. The upper level comes in solid wood or marble, the lower in solid wood or lacquer finish in many delicate hues. The possibilities of use are also doubled. Books and decorative objects can be placed on the lower level, while the upper level performs the usual service functions.

Fiorile Poltrona Frau

Fiorile Poltrona Frau Fiorile Poltrona Frau Fiorile Poltrona Frau Fiorile Poltrona Frau Fiorile Poltrona Frau
Soft, rounded geometries. Different shapes and sizes that can be mixed and matched according to taste. A triangle. A square. A rectangle. The smoothed corners, the soft, understated, almost organic lines. Roberto Lazzeroni follows up “Ginger” and “Fred” with “Fiorile”. A family of tables of different designs and heights that can be used in different ways and combined according to taste. In the living-room your favourite table can be freely combined with the armchair in the corner or can add the finishing touch to a sofa, whilst in the bedroom it can be used as a minimalist bedside table. When combined, the tables create geometries that are different every time thanks also to their different heights, adding dynamism and elegance to the space in the process. The supports, in wengé-tinted solid ash, take their cue from the base of the new “Montera” chair in terms of their materials and sleek design. The inlay work that is a feature of the new “Bolero” table can also be seen on the surfaces of all of the “Fiorile” tables, produced from birch plywood with an ash veneer. And according to the geometries of the table, the grain changes to form a different design each time.

Plain Flexform

Plain Flexform Plain Flexform Plain Flexform Plain Flexform
Rigorous with its terse geometric C shape, PLAIN is a table to place beside or in front of seating, in metal covered with cowhide. It is a functional object because it is easy to move where needed, with precious materials that make it an accessory that enhances the linear presence of any sofa.

Butterfly Zanotta

Butterfly Zanotta Butterfly Zanotta Butterfly Zanotta Butterfly Zanotta
Coffee table Bent plywood frame, veneered with natural or wengé-stained, white or black painted oak. Top in tempered plate glass.

90 x 90 x H 53 cm
90 x 120 x H 53 cm

Falo’ Riva 1920

Falo’ Riva 1920 Falo’ Riva 1920 Falo’ Riva 1920 Falo’ Riva 1920
Falò small wood: A small table with a 5cm-thick solid wood top. The framework is made up of solid wood slats, assembled and glued by hand.
Falò small vetro: Small table with tabletop in tempered clear glass thickness 1,5 cm. Structure made entirely of solid wood.

Carlotta Flexform

Carlotta Flexform Carlotta Flexform Carlotta Flexform Carlotta Flexform Carlotta Flexform
The versatile CARLOTTA family of products includes a small armchair, an ottoman, a chair, tables and a bookcase. The collection, drawing on a design matrix close to rationalism, relies on a light structure in flat metal with visible bolts at the joints. CARLOTTA comes as a folding chair with seat and back in cowhide, paired with an ottoman, as a compact, airy bookcase with overhanging wooden shelves on two uprights, or in the form of tables with solid wood tops. Bauhaus overtones for a timeless collection.
Frame in satined metal. Tops black or white wooden tops treated with a high resistant and scratch- proof lacquer.

Infinity Flexform

Infinity Flexform Infinity Flexform
Frame metal frame inside and outside epoxy powder coated available in color: white (cod 100), cream (cod 205), black (cod 900), khaki green (cod 705), brown grey (cod 805), pearl beige (cod 130), umbra grey(720), pearl mouse grey(740), pearl white( cod.150). Top metall frame with epoxy powder coated and glass. Joint elements in satined steel. Base in chromed metal.
INFINITY is a bookcase/storage system in enameled metal, composed of a few closed and freely stackable modules fastened together by a simple, invisible steel bolt. The units give rise to infinite compositional possibilities, generating an always varied checkerboard of empty and full segments. Elegant and essential, for extreme personalization. The light but large structure is freestanding and can contain elegant cowhide baskets with lateral grips, easy to slide out of the shelves for the storage of objects. The variable, free configurations, the contrast of metal and cowhide in different colors, grant great flexibility to the design, and are the keys to the success of a product that is now one of the company’s icons.

"The idea behind INFINITY was to erase the container and bring out the content. Boxes composed of a minimal material, thin sheet metal, permit the construction of storage units of any size, seamlessly." Antonio Citterio

Tris Flexform

Tris Flexform Tris Flexform Tris Flexform Tris Flexform
Ø 40 x H 46 cm
Ø 60 x H 26 cm
Ø 60 x H 53 cm
Ø 120 x H 35 cm

A family of only round tables in different sizes. The base is in solid wood, with crossbars that connect the four legs, forming a particular crossed design near the floor. The tops without borders are in wood or marble. Beautiful in groupings of two or three pieces, with different tops and heights, they can complete a corner or provide a functional surface next to a sofa.

Frank B&B Italia

Frank B&B Italia Frank B&B Italia
The Frank collection includes a further service element in steel that offers a wide range of finish options in neutral or bright colours. The asymmetrical position of the vertical elements enables the base to be drawn as close as possible to the seats.

For more information about our proposals don't hesitate to contact us:
FORM            (+39) 031 480 476